登录    |    注册

您好,欢迎来到澳门新葡新京网赌!

澳门新葡新京首页>澳门新葡新京网赌期刊>本期导读>磁导率检测技术对430不锈钢构件检测的最优激励频率设计研究

磁导率检测技术对430不锈钢构件检测的最优激励频率设计研究

92    2019-08-27

¥0.00

全文售价

作者:任仙芝, 任尚坤, 樊清泉

作者单位:南昌航空大学 无损检测技术教育部重点实验室, 江西 南昌 330063


关键词:无损检测;磁导率检测;铁素体不锈钢;激励源;线圈匝数;拉应力


摘要:

磁导率检测技术是一种可高精度评价铁磁构件整体或部分区域应力集中、疲劳损伤状况的无损检测方法。依据磁导率检测原理,以430铁素体不锈钢试件为研究对象,研究激励电压幅值、激励线圈匝数、检测线圈匝数及外加拉应力对检测传感器最优激励频率的影响。研究发现,最优检测频率随激励线圈匝数的增加而减小;最优检测频率与外加拉应力有关,当外加拉应力超出试件的弹性变形阶段时,最优频率随拉应力的增大而增大;最优检测频率不随激励电压幅值、检测线圈匝数的变化而变化,但随着激励电压幅值、检测线圈匝数的增加,检测灵敏度升高。该研究结论可为灵敏传感器的设计提供参考。


Research on optimal excitation frequency of 430 stainless steel components detection based on permeability testing technology
REN Xianzhi, REN Shangkun, FAN Qingquan
Key Laboratory of Nondestructive Testing of Ministry of Education, Nanchang Hangkong University, Nanchang 330063, China
Abstract: The permeability testing technology is a non-destructive testing method that can evaluate the stress concentration and fatigue damage of the whole or part of the ferromagnetic component with high precision. Based on the principle of permeability detection, taking 430 ferritic stainless steel specimen as the research object, the effects of the excitation voltage amplitude, the number of turns of the excitation coil, the number of turns of the detection coil, and the tensile stress on the optimal excitation frequency of the detection sensor were studied. The study shows that the optimal detection frequency decreases with the increase of the number of turns of the exciting coil; The optimal detection frequency is related to the external tensile stress, and when the external tensile stress exceeds the elastic deformation stage of the test piece, the optimal frequency increases as the tensile stress increase; The optimal detection frequency does not change with the excitation voltage amplitude, the number of turns of the detection coil, but with the increase of the excitation voltage amplitude, the detection coil turns, the detection sensitivity increases. The conclusion of this study can provide reference for the design of sensitive sensors.
Keywords: non-destructive testing;permeability testing;ferritic stainless steel;excitation source;coil turns;tensile stress
2019, 45(8):38-43  收稿日期: 2018-05-14;收到修改稿日期: 2018-07-22
基金项目: 国家自然科学基金资助项目(51865039)
作者简介: 任仙芝(1992-),女,河南周口市人,硕士研究生,专业方向为磁导率无损检测
参考文献
[1] 王美玲. 1Cr17铁素体不锈钢退火工艺优化及成形性研究[D].鞍山:辽宁科技大学, 2015.
[2] 张聪,赵爱民,尹鸿祥,等. 17% Cr铁素体不锈钢的再结晶组织与织构特征[J].材料热处理学报, 2015, 36(2):72-76
[3] 丁茹,王伯健,王成,等.铁素体不锈钢的开发研究[J].钢铁研究学报, 2009, 21(10):1-4
[4] 马立,董文卜.热处理工艺对12% Cr铁素体不锈钢组织性能的影响[J].中国冶金, 2014, 24(5):25-29
[5] 杨欣妍,陈旭,丁毅,等.热处理工艺对430铁素体不锈钢耐蚀性的影响[J].腐蚀与防护, 2013, 34(1):49-51
[6] 蔡淑娟,朱亮,龚练.热输入对430铁素体不锈钢热影响区组织和韧性的影响[J].兰州理工大学学报, 2016, 42(2):24-27
[7] 吴德会,李雪松,黄一民,等.利用局部磁滞回线特性的无损检测新方法[J].仪器仪表学报, 2015, 36(10):2207-2214
[8] 曾杰伟,苏兰海,徐立坪,等.逆磁致伸缩效应钢板内应力检测技术研究[J].机械工程学报, 2014, 50(8):17-22
[9] DUBOV A A. Principle features of metal magnetic memory method and inspection tools as compared to known magnetic NDT methods[C]//World Conference on Nondestructive Testing. 2006:1034-1037.
[10] SHI C, DONG S, XU B, et al. Stress concentration degree affects spontaneous magnetic signals of ferromagnetic steel under dynamic tension load[J]. Ndt&E International, 2010, 43(1):8-12
[11] 金哲.钢轨应力的电磁超声检测技术研究[D].南京:南京航空航天大学, 2011.
[12] 于亚婷,杜平安,廖雅琴.线圈形状及几何参数对电涡流传感器性能的影响[J].仪器仪表学报, 2007, 28(6):1045-1050
[13] 韩晖,肖迎春,白生宝,等.结构疲劳损伤的声发射检测可靠性研究[J].机械设计与制造工程, 2014(6):76-79
[14] GAO W, HU Y, MU X, et al. Real-time detection and segmentation of submerged-arc welding defects in X-ray radiography images[J]. Chinese Journal of Scientific Instrument, 2011, 32(6):1215-1224
[15] 杨梅芳,任尚坤,赵珍燕.基于磁导率检测技术的传感器设计研究[J].澳门新葡新京, 2017, 43(2):77-81
[16] 任尚坤,郭峰,徐振瀚. 20#钢构件应力疲劳检测的新技术及试验研究[J].仪器仪表学报, 2014, 35(5):1155-1160

Xml地图