登录    |    注册

您好,欢迎来到澳门新葡新京网赌!

澳门新葡新京首页> 澳门新葡新京网赌期刊 >本期导读>光纤光栅传感器用于飞行试验应变测量的可行性研究

光纤光栅传感器用于飞行试验应变测量的可行性研究

22    2020-05-27

¥0.50

全文售价

作者:李卢丹, 白雪, 胡耀升

作者单位:中国飞行试验研究院, 陕西 西安 710089


关键词:飞行试验;光纤光栅;应变测量;传递特性


摘要:

为推进光纤光栅(FBG)传感器在飞行试验应变测量中的应用,对其进行地面验证试验,并分析传感器封装结构、测试粘接工艺对应变测量的影响。FBG在飞行试验应用中具有体积小、质量轻的优势,但光纤易受损,需用不锈钢基片将光纤封装后使用AB胶与被测基体粘接。该文通过FBG与电阻应变计对比实验,验证其应变测量可行性,结果表明,FBG传感器响应趋势与电阻应变计一致,但封装后的FBG在胶结层存在较大应变损失;进一步建立应变传递模型进行仿真分析,定量计算测量误差,提出在满足飞行试验工艺可行性的前提下,胶结层厚度应尽量小,弹性模量应尽量大,即可有效提升FBG应变测量精度。


Feasibility study of fiber Bragg grating sensor for strain measurement in flight test
LI Ludan, BAI Xue, HU Yaosheng
Chinese Flight Test Establishment, Xi'an 710089, China
Abstract: In order to promote the application of fiber Bragg grating (FBG) sensor in strain measurement of flight test field, ground verification tests were carried out, and the effects of the packaging structure and the bonding technology of the sensor were analyzed. FBG has the advantages of small size and light weight in flight test applications, but the optical fiber is easily damaged, so it is necessary to use a stainless steel substrate to encapsulate the optical fiber and then use AB glue to bond to the test substrate. In this paper, FBG and resistance strain gages are compared to verify the feasibility of strain measurement. The results show that the response trend of the FBG sensor is consistent with the resistance strain gauge, but there is a large strain loss in the bonding layer of the FBG after packaging. Further establish a strain transfer model for simulation analysis, and quantitatively calculate measurement error. It is proposed that under the premise of meeting the feasibility of flight test process, the thickness of the cement layer should be small enough and the elastic modulus should be large enough, which can effectively improve the accuracy of FBG strain measurement.
Keywords: flight test;fiber Bragg grating;strain measurement;transfer characteristics
2020, 46(5):45-50  收稿日期: 2019-12-08;收到修改稿日期: 2020-01-21
基金项目:
作者简介: 李卢丹(1991-),女,陕西渭南市人,工程师,硕士,主要从事机载测试校准研究
参考文献
[1] 曾捷, 张钰珏, 郭晓华. 光纤光栅传感器与机械结构预处理胶接方法研究[J]. 南京航空航天大学学报, 2017, 49(1): 105-109
[2] LAMBERTI A, LUYCKX G, PAEPEGEM W V, et al. Detection, localization and quantification of impact events on a stiffened composite panel with embedded fiber Bragg grating sensor networks[J]. Sensors, 2017, 17(4): 743-746
[3] GHOSHAL A, AYERS J, GURVICH M, et al. Experimental investigations in embedded sensing of composite components in aerospace vehicles[J]. Composites Part B Engineering, 2015, 71(9): 52-62
[4] 丁莹莹, 何泽新, 李世念, 等. 光纤传感监测技术在工程地质领域中的应用研究进展[J]. 矿产勘查, 2019, 10(8): 2078-2085
[5] 童杏林, 何为, 张翠, 等. 光纤光栅与光纤法珀传感器在航空航天领域的研究与应用进展[J]. 激光杂志, 2018, 39(7): 1-7
[6] 李洁. 基于分布式光纤的应变传递理论及实验研究[D]. 大连:大连理工大学, 2018.
[7] SANTE R D. Fibre optic sensors for structural health monitoring of aircraft composite structures: recent advances and applications[J]. Sensers, 2015, 15(8): 18666-18713
[8] 陈铭杰. 直升机旋翼桨叶弯矩与变形分布式光纤智能监测技术研究[D]. 南京:南京航空航天大学, 2019.
[9] 孔祥龙. 基于FPGA的高速光纤光栅解调技术与实验研究[D]. 济南:山东大学, 2019.
[10] MARZBANRAD B, JAHED H, TOYSERKANI E. On the sensitivity and repeatability of fiber Bragg grating sensors used in strain and material degradation measurement of magnesium alloys under cyclic loads[J]. International Journal of Advanced Manufacturing Technology, 2016(9-12): 1-9
[11] 耿胜各. 光纤光栅温度传感器中应变与温度交叉敏感问题研究[D].南京:南京邮电大学, 2017.
[12] WANG J Y, JIANG L, SUN Z R, et al. Research on the surface subsidence monitoring technology based on fiber Bragg grating sensing[J]. Photonic sensors, 2017, 7(1): 20-26
[13] 章亚男, 范迪, 沈林勇. FBG细径形状传感器的应变传递和精度实验[J]. 光学精密工程, 2019, 27(7): 1481-1491
[14] 吴入军, 郑百林, 陈田. 光纤布拉格光栅传感器应变传递耦合机理分析[J]. 光子学报, 2017, 46(10): 49-58

Xml地图